Elk m1 ethernet module activetcl serial#
Elk m1 ethernet module activetcl full#
Elk m1 ethernet module activetcl software#

I've managed to create some programs that make my Elk announce the current temperature. It's prompted me to think quite a bit about how this could be used. In playing around a bit, I was able to set up programs to arm my system.

Elk m1 ethernet module activetcl full#

The full control protocol can be found at Įlk also have a little Windows utility to calculate the CRC available for download at We will have to wait for the ISY team to complete their Elk M1 module for that. Unfortunately, this is all one way and cannot read any values from Elk. Many commands are possible, such as turning on/off/Toggling outputs, triggering Tasks in Elk, simulating function Key presses on a keypad, arming and disarming, sending test to keypads, speaking words (if you have the M1 Gold). To port 2101 at your Elk M1XEP IP address, using an ISY network resource set to TCP/IP and C Escaped Mode.Ġ0000 = Time to remain on in seconds (0 is forever) Until then, it is possible to CONTROL functions in Elk M1 from ISY using the network module and the Elk M1 Control RS-232 ASCII String Protocol.įor example, to turn on Output 1 in Elk M1, you simply send Ther's been many requests for better integration between Elk M1 and ISY, which may well be forthcoming in a future firmware release, or by module purchase. M1 can be integrated with other manufacturers systems for complete control of home or business.Posted some info over in the Elk forum, but maybe better here as a reference for others. ELK's M1 Cross Platform Control Family integrates rock solid security and full featured automation providing convenient user interfaces and remote control options. M1 Cross Platform ControlĮlk Products designs and manufactures premium quality electronic equipment for the professional security and automation installer. The unit is factory defaulted to obtain a dynamic IP address from a DHCP (i.e., ethernet switch, cable modem, etc.), however, it may also be used with a static IP address.

Elk m1 ethernet module activetcl software#

A software set-up utility is built into the Elk RP (version 1.5.0 or later) for configuring the connection set-up, network password, etc. The M1XEP is powered with the included 12 VDC, 1.5 Amp, plug-in power supply. LED indicators for Power, Link and Data.2.1 mm barrel type power connector (center positive).

Elk m1 ethernet module activetcl serial#

Connects to the M1 RS232 serial port (port 0).

RS232, DB9M 9-pin serial port connection.

Integrated 802.3 compliant 10/100 MBit network interface.

Federal Information Processing standards (FIPS) 128 bit encryption.

TCP/IP stack supporting the following protocols: TCP, UDP, DHCP, SSL 3.0/TLS, 1.0, HTTP, SMTP.

Internet monitoring and reporting capability.

Secure connection with password protection and HTTPS encryption.Web server with embedded Java applet 'M1 Virtual Keypad'.It features a secure embedded web server, with a user interface built on a Java applet, email notification, and encryption algorithms for security sensitive environments. It may be used to connect an M1 controller to an ethernet network using TCP/IP protocol. The M1XEP is an ethernet device server with an RS-232 serial port interface. Requires permanent broadband connection Cable Modem, DSL, T1, etc. Internet Connectivity For The M1 ControllerĪllows M1 Gold to be connected to the Internet or LAN (network) for programming, monitoring, remote control, email notifications, etc.